How to put all the materials together for your intelligence cards
If you have already gathered all of the materials you are going to be needing to prepare your wonderful intelligence cards the following step you will need to take is to establish a set up process in order to take the most advantage of what you have discovered. In the first place, prepare the uncut visual material making sure to have each element identified and having archived all of the interesting information about each element. In the second place, if the element is not a not a discrete question, cut the back ground to not mount more than one element over the card. In the third place, label the back of the cardboard before placing the image so that you do not have to throw out the whole thing if you make a mistake in the labeling. You will need to cleanly label the adequate identification of the element with a black thick pointed permanent marker. The bo
dy of the letters should not be less than an inch, and actually the bigger they are the better.
Then with your labeled cardboard, stick your main materials on the cardboard with glue. Make sure you apply a thin layer of glue especially if the image has printed text on the back. The thick layers of glue can make the ink run after having placed the image and will ruin a carefully done job. You already have a resistant tool that is also high in quality. If you are intending on keeping it for many more years to come, you can take the next step in plasticizing your new intelligence cards as has already been indicated.
|